Preparations - Canon PowerShot A400 Quick Start Manual

" " ~ ~ _ .-'. - - ' _ _ " . 9 " . , . , • fl" ' " fl V _ V,
Usinglhe·Software.olt/th•..Windows
Platform -Preparations
This chapter explains the basic procedures for installing the software and connecting the
camera to a computer. Read this material before you connect the camera to the computer.
Installing the Software and
USB
Driver
Start by installing the software from the Canon Digital Camera Solution Disk .
• • • You must install the software before you connect the camera to the
. . . computer.
• Users of Windows XP and Windows 2000 must first log in as an Administrator
(computer system administrator) to install programs.
- Your camera and computer
- Canon Digital Camera Solution Disk
-Interface cable supplied with the camera
1
Confirm that the camera is NOT connected to
the computer.
If it is, disconnect the cable. The software cannot
be properly installed if the camera is connected to
the computer at the start
2
Close any programs that are running.