Table of Contents
Advertisement
II Camera Preparations 1 Loading and Checking the Battery
JJ ©
/ €
All buttons used for changing camera func
tions are equipped with a six-second timer.
After pressing and releasing the button, the
operation mode activated by the button re
mains active for six seconds. During this time
period, necessary information for the selected
mode is displayed in the viewfinder and LCD
panel.
10
This camera uses a single 6V lithium battery
(2CR5). Load the battery as follows.
1) Turn the battery cover latch counterclock
©
wise to open the battery compartment.
2) Insert the battery so that its terminals
3) Replace the battery cover and turn the
4) Press the lock release button and turn the
If the entire battery indicator ( «si ) is dis
played, the battery is in good condition.
enter the camera first.
latch clockwise to firmly lock it in place.
command dial to a position other than "L".
Check the battery indicator displayed in
the LCD panel.
Advertisement
Table of Contents
