Canon PowerShot A400 Quick Start Manual page 334

If a problem occurs while the printer is connected to the camera, the printer's
display window will light or blink red and the camera's LCD monitor may display
one of the messages indicated below. (If the camera is connected to a TV, the
message will appear on the TV screen.)
No paper Paper cassette is incorrectly Load the paper cassette correctly.
installed.
Paper is not loaded correctly in Load paper into the cassette
the paper cassette. correctly.
No paper in the paper cassette.
Load paper into the cassette.
Paper is not feeding correctly. Take out the paper cassette, and
then manually remove any paper
remaining in the printer.
No Ink No ink cassette in the printer. Load an ink cassette.
The ink cassette is out of ink.
Load a new ink cassette.
Incompatible paper size Wrong paper size is loaded in the Use the designated paper size.
printer.
Incompatible ink size Wrong ink cassette size is loaded Use the designated ink cassette
in the printer. size.
Ink Cassette Error The ink cassette is not working
Remove the ink cassette from the
correctly.
printer, take up the slack in the ink
sheet, and then reload the
cassette. If this does not solve the
problem, replace with a new ink
cassette. If the ink cassette is
stuck in the printer, contact a
Canon Customer Support help
desk for assistance.
Paper and ink do not match
The paper and ink are from Check the ink/paper sets.
different sets.
Paper Jam Paper jammed during printing.
Turn the power off and turn it on
again. If the printer fails to eject
the paper, contact a Canon
Customer Support help desk for
assistance.
Paper has been changed. Paper was changed after the print Change back to the original paper
menu was displayed. size or change the print settings.
Communication Error
Error in communication between Turn the printer and camera
printer and camera.
power off and turn it on again.
If the error message does not
clear, contact a Canon Customer
Support help desk for assistance.
35