Canon PowerShot A400 Quick Start Manual page 202

521
Starting ImageBrowser
How to Set ImageBrowser to Start Automatically with Mac OS X
You can have ImageBrowser start automatically when you connect the camera to the
computer by adjusting the following settings.
Mac
as x
v10.2/v10.3 (The window will appear slightly different in v10.3.)
1. Start Image Capture, click the [Image Capture] menu and select [Preferences].
2. In the next menu, click the [When a camera is connected, open:] list box and select
[Other].
"""'J'" ..... "1-''',,,0:: Preferences
iPhoto
Camera Preferences Image Capture
When a camera is connected. open:
No
application
Scann., Peer.,ences
<ii' [ lU
illN
111• •
"3 • . . . .
· 1'D'
When a scanner button is pressed, open: '._Im--:ag=--e_ca-'--pt_ure
-_>.
i
CJ
Use
TWAIN
software whenever possible
3. Select [lmageBrowser] in the program selection window.
4. Close Image Capture.
ImageBrowser will start automatically from the next connection onward.
Mac
as x
v10.1
1. Start Image Capture and select [Other] from the Hot Plug Action list box.
Automatic Task:
--------~'
O<:cursaf1€rdownJoadmg
'H""
,.y~ "'~
.. v.
v
Image Capture Application
None
No cameras are connected. )('
::!~~~~~~~!!I>
2. Select [lmageBrowser] in the program selection window.
3. Close Image Capture.
ImageBrowser will start automatically from the next connection onward.
Mac OS 9
, Attach the supplied interface cable to the computer's USB port and the camera's
Digital Terminal. Prepare the camera for communication with the computer.
~
Procedures for attaching the camera to the computer and placing it in
l..II
the correct mode for connecting vary between camera models. See
Information about Your Camera (p. 92) for details.