Canon PowerShot A400 Quick Start Manual page 52

• Make the brightness in each image
consistent. The final image will appear
unnatural if the difference in brightness
is too great.
• Pan (swivel) the camera to take
successive shots.
• To shoot close-ups, slide the camera
over the subject, keeping it parallel to
the subject as you move.
1
Set the mode switch to
101.
2 Select ~ or ~ from the
FUNC.
menu.
• See Selecting a Shooting Mode (p. 35).
3
Shoot the first image.
• The exposure and vllhite balance settings are
set and locked with the first image.
Shooting - The Basics
I
4
Compose and
shoot the second
image so that it
overlaps the first.
• Minor discrepancies in
the overlap can be
~
Sequence
corrected with the
software.
• An image can be retaken. Press .... or
~
to
return to that frame.
S
Use the same procedures to
shoot the remaining frames.
• A maximum of 26 images can be recorded
either horizontally or vertically.
6
Press the SET button after the
last shot.
47