Canon PowerShot A400 Quick Start Manual page 26

Preparing the Camera
I
::»e1ttlna the Date/Time
• • • For embedding the date on the image
U
data, refer to page 52.
• Setting the date and time settings does
not cause the date/time stamp to appear
on images. For printing images with the
date on them, refer to page 92, the
Direct Print User Guide or Software
Starter Guide.
• For important information, see
Replacing the Date Battery (p. 120).
4
Set the date and
time.
• Use ~ or ~ to change
the value of the
highlighted field.
• Press. or • to set the date and time.
• The date can be set up to the year 2030.
• The factory default for the date format may
differ from that shown here in some regions.
5
Press the SET button.
6
Press the MENU button.
. .
~:-
Ree. Menu
:'0
Off .
3
Select ~ (Date/
Time) using. or
• and then press
the SET button.
The Date/Time menu will be displayed when
camera power is turned on for the first time or
with low date battery power. Perform
operations from Step 4 (Replace the date
battery when power from the current one is
exhausted (p. 120)).
1
Turn the power on (p. 23).
2
Press the MENU
button and select
the
[W
(Set up)]
T
menu using ~.
21