PowerShot A400
I
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
USB Port
Interface Cable
To the DIGITAL
Terminal
1. Open the terminal cover by slipping
a fingernail under its left edge.
2. Insert the interface cable connector
all the way into the digital terminal.
2
Set the mode switch to the playback mode and turn the camera's power on.
This will prepare the camera to exchange data with the computer.
-Canon Digital Camera Solution Disk
- ArcSoft Camera Suite 1.3
See ArcSoft Camera Suite J.3 CD-ROM (p. 77) for information about the features and
installation procedures for the programs on the disk.
The camera does not record RAW images.