Canon PowerShot A400 Quick Start Manual page 96

Various Functions
I
• You can set one copy of each image to print
by pressing the SET button, then selecting
[Mark all] using .. or
~,
and pressing the
SET button again.
• When the print type is set to [Standard] or
[Both], the setting for the number of print
copies can be changed for each image.
• Images are printed in order from oldest to
newest by the shooting date.
• A maximum of 998 images can be set.
• When [Print Type] is set to [Both], the
number of copies can be set. When it is set
to [Index], the number of copies cannot be
set (only one copy will be printed).
• Print settings can also be assigned to
images with the bundled software
programs (ZoomBrowser EX or
ImageBrowser) on a computer. However,
do not set the date in the DPOF print
settings when printing images that have
had the date embedded with the [Date
Stamp] function. This may cause the date
to be printed twice.
When [Index] is selected, the print settings
can be deleted. For the instructions on
changing settings, please reread Step 3 from
the beginning.
• You can cancel all the settings by selecting
[Clear all].
4
Press the MENU button.
• The setting will be complete and the Print
Order menu will reappear.
• When the print type
(p. 92) is set to [Index],
select an image using
~
or
~
and mark or
remove marks from
images using .. or
~.
A check mark appears
on the marked image.
• Press ~ to switch to index playback. You
can use the same procedures to select
images in index playback (3 images).
All the Images on a SO
Card
• Press ~ to switch to
index playback (3
images).
91