Canon PowerShot A400 Quick Start Manual page 100

Hide thumbs Also See for PowerShot A400:
Table of Contents

Advertisement

For setting all images on
the SO card
e
Switch to index playback
(a set of 3 images) by
pressing ~.
• Press the SET button, select [Mark all] using
• or •
and press the SET button again to
mark all the images. (If you select [Clear all]
instead of [Mark all], you can remove marks
from all the images.)
• You can select images using .... or
~
and
change the settings using • or •
after
[Mark all] or [Clear all] has been selected.
4
Press the MENU button.
• The selection mode will turn off and the
Transfer Order menu will reappear.
• Images are transferred in order from
oldest to newest by the shooting date.
• A maximum of 998 images can be
marked.
Various Functions
I
Downloading Images to a Computer
The following methods can be used to
download images recorded by the camera to
a computer. Some methods are not
applicable to all operating systems.
• Downloading via a Camera to
Computer Connection
• With this method, you download images using
computer commands after you have installed
the appropriate software.
.... See Connecting the Camera to a
Computer (p. 96) and the separate
Software Starter Guide.
• With this method, you download images using
camera button operations after you have installed
the appropriate software (the computer settings
only need to be adjusted for the first download).
.... See Connecting the Camera to a
Computer (p. 96) and Downloading
Images by Direct Transfer (p. 100).
95

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents