Canon PowerShot A400 Quick Start Manual page 247

Power5hot 5500 DIGITAL ELPH/DIGITAL IXU5 500
Power5hot 5410 DIGITAL ELPH/DIGITAL IXU5 430
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
USB Port
Interface Cable
To the DIGITAL
Terminal
1. Slip a fingernail under the terminal
cover and lift to open.
2. Insert the interface cable connector
all the way into the digital terminal
until it clicks.
2
Set the mode switch to the playback mode and turn the camera's power on.
This will prepare the camera to exchange data with the computer.
-Canon Digital Camera Solution Disk
- ArcSoft Camera Suite 1.3
See ArcSoft Camera Suite 1.3 CD-ROM (p. 77) for information about the features and
installation procedures for the programs on the disk.
The camera does not record RAW images.