Canon PowerShot A400 Quick Start Manual page 118

Corru pted data
RAW
Unidentified Image
Cannot magnify!
Cannot rotate!
Incompatible WAVE
format
Cannot register this
image!
List of Messages
I
l!'ouatternPted to play back an image with corrupted __ d_a_ta_. _
You attempted to play back an image recorded in the RAW format.
- - - - - - -
- - - - - _
..
_ -
- - - - - - -
You attempted to play back an image that was recorded in a special format
(proprietary format used by the camera of another manufacturer) or a movie
that was taken with another camera.
You attempted to magnify an image which was photographed with another
camera, recorded in a different format, or edited on a computer or a movie
clip.
You attempted to rotate an image which was photographed with another
camera, recorded in a different format, or edited on a computer or a movie
clip.
A sound memo cannot be added to this image since the format of the existing
sound memo is incorrect.
You attempted to register an image recorded with another camera or a movie
clip as a start-up image.
Exx
Protected! You attempted to erase protected image or movie clip.
.Too many images have been marked for printing or transferring. Cannot
Too many marks!
!
process any more.
Cannot mark image
n . n _
!
\((~u~~e_rnpted
to set the print settings for a non-JPEG file_---
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or
play back. If the same message recurs freq uently, the camera may be
damaged. Note down the error number [xx] and take the camsra to a
. Customer Support Help Desk. If this message appears immediately after you
: have taken a shot, the camera may not have shot the image. Switch to the
Playback mode and check whether the image was actually recorded.
113