Canon PowerShot A400 Quick Start Manual page 243

Hide thumbs Also See for PowerShot A400:
Table of Contents

Advertisement

• • Ensure that you have installed the software from the supplied Canon Digital
. . . Camera Solution Disk before you connect the camera to the computer.
Item to Prepare
• Your camera and computer
• Canon Digital Camera Solution Disk
• Interface cable supplied with the camera
•.• • Use the interface cable to attach the c.amera directly to a USB port on the
. . .
computer, not through a USB hub. The connection may not operate correctly
through a USB hub.
• The connection may not operate correctly if you are using other USB devices,
excluding USB mice or keyboards, at the same time as the camera. If this
occurs, disconnect the other devices from the computer and try reconnecting
the camera .
• Do not connect two or more cameras at the same time to the same computer
via the USB interface. The connections may not operate correctly.
• Never allow the computer to go into standby (sleep) mode while a camera is
connected via the USB interface. If it does happen, never disconnect the
interface cable. Try to awaken the computer with the camera in the
connected state. Some computers will not awaken properly if you disconnect
the camera while they are in standby (sleep) mode. Please refer to your
computer manual for instructions regarding the standby (sleep) mode.
You are recommended to power the camera from a household power source
(AC adapter) when connecting to a computer (if available for your camera
model). Ensure that you use fully charged batteries if you will not be using a
household power source.
See the page (pp. 94 - 102) for your specific model for information about connecting the
camera to the computer.

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents