Initial Preparations - Canon PowerShot G1 X Mark III Getting Started

Initial Preparations

( 2 )
( 5 )
( 4 )
( 1 )
( 1 )
6
1


( 1 )
2

( 3 )

( 2 )
3

( 2 )
4




Attach the strap adapter.
Attach the included strap adapter to the
camera as shown.
On the other side of the camera, attach
the strap adapter the same way.
Attach the strap.
Attach the included strap to the strap
adapter as shown.
On the other side of the camera, attach
the strap the same way.
Insert the battery pack.
After aligning the
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
Charge the battery pack.
Plug the power cord into the charger,
then plug the other end into a power
outlet.
The charging lamp turns orange, and
charging begins.
When charging is fi nished, the lamp turns
green. Remove the battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to "Specifi cations" in the
downloadable Camera User Guide.
marks on the battery