1. Introduction The 1 by 8 HDMI Multi-channel Splitter is the most advanced solution to HDMI signal distribution. It supports to transfer 8-bit and Deep Color (10-bit and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz (6.75Gbps).
Page 4
5. Features ● HDMI, HDCP1.1 and DVI1.0 compliant. ● Deep color support up to 12-bit, 1080p@24/60 Hz. ● One HDMI source to be connected to up to eight HDMI displays simultaneously. ● HDCP keysets allow each output to work independently when connecting to an HDMI display.
Page 5
HDMI OUT SYNC HDMI IN HDMI OUT POWER CLUX-8M HDMI v1.3 SPLITTER DC 5V ① HDMI OUT 1/7/8: Connect each of the output ports to the HDMI display. When more than one output connected, the HDMI outputs play identical video signal simultaneously.
Page 6
6.2 Rear Panel HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT EDID SYS.Reset ① EDID: Default factory setting is TV, leave as is if the display is properly. Switch to STD to use build-in EDID if the display has problems. When the EDID control switch in TV selection, the unit will detect the first HDMI output source’s EDID and record in the unit.
7. Connection and Installation DVD or Set-Top-Box HDMI Cable HDMI Cable HDTV HDMI display LCD TV 8. Specifications Frequency Bandwidth 2.25Gbps (single link) 1 x HDMI female port (Type A connector) Input Port 8 x HDMI female ports (signal link) Output Ports 5V/5A DC (US/EU standards, CE/FCC/UL certified) Power Supply...
Need help?
Do you have a question about the CLUX-8M and is the answer not in the manual?
Questions and answers