Page 1
CLUX-3D12S1A 1 x 2 HDMI Splitter with 3D Audio to Amplifier Operation Manual Draft Manual CLUX-3D12S1A...
Page 2
Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. Introduction The 1 x 2 HDMI with audio box is compliance with HDMI 1.3 and it allows Set- top boxes, DVD players, Blu-ray players and other HDTV devices with two HDMI outputs to be connected to up to two HDTV displays. The 3 HDMI output supports 3D audio with blue screen, which allaws it to connect to the AVR that does not support 3D signal.
• Supports EDID functionality. The unit will detect the first HDMI v1.2/8bits, HDMI v1.3 (10bits or 12bits) or DVI output source’s EDID and record in the unit. When the output sources connected with the entire combination version (HDMI v1.2/8bits, v1.3/10bits, v1.3/12bits or DVI), the system can automatically to support HDMI v1.2/8bits, v1.3/10bits, v1.3/12bits or DVI to expect ports.
7. Hardware Description 7.1 Front Panel HDMI OUT 1 & 2: Connect each of the output ports to the HDMI display. ① HDMI OUT 1 is the master video port and when more than one output connected, the HDMI outputs play identical video signal simultaneously. HDMI OUT 3: Connect HDMI audio output port to the AVR, the audio ②...
Need help?
Do you have a question about the CLUX-3D12S1A and is the answer not in the manual?
Questions and answers