Alto-Shaam 6.10ESG Technical & Service Manual page 37

P R O G R A M F U N C T I O N
T O C A N C E L T H E R E C O R D I N G F U N C T I O N
WITH THE "Recorder ON"
Press the up
s y m b o l
PRESS THE PROGRAM INSTALL KEY TO CONFIRM THE SELECTION.
"Recorder OFF"
S A V I N G A R E C O R D E D C O O K I N G P R O C E D U R E
W h e n t h e p r e v i o u s c o o k i n g m o d e s t e p s r e c o r d e d p r o d u c e s a t i s f a c t o r y r e s u l t s , t h e r e c o r d e d
c o o k i n g p r o c e d u r e c a n b e s a v e d i n m e m o r y f o r f u t u r e u s e .
PRESS THE PROGRAM INSTALL/EDIT KEY.
P r e s s t h e u p
a d j u s t m e n t k n o b u n t i l t h e s a v e s y m b o l
PRESS THE PROGRAM INSTALL/EDIT KEY TO CONFIRM THE SELECTION.
Name the procedure. Rotate the adjustment knob to select the first letter
of the procedure name. Press the up
second letter position and rotate the adjustment knob to select the second
letter. Continue this procedure for each subsequent alpha character,
number, or symbol required.
PRESS THE PROGRAM INSTALL AND EDIT KEY TO CONFIRM THE PROCEDURE NAME.
The display will indicate the first unoccupied memory location within the programmed menu.
If an alternate location is desired, rotate the adjustment knob to highlight another unoccupied,
numbered memory location within the programmed menu. If an occupied location is selected,
the existing procedure will be replaced by the new procedure.
PRESS THE PROGRAM INSTALL/EDIT KEY TO CONFIRM THE PROCEDURE LOCATION.
T h e d i s p l a y w i l l i n d i c a t e " p l e a s e w a i t " a n d w i l l r e t u r n t o t h e m a i n m e n u d i s p l a y .
The procedure has now been saved in the selected location and can be verified by rotating the
adjustment knob to the saved procedure.
To review the set operating parameters of any programmed procedure, press the programmed menu
and rotate the adjustment knob until the procedure to be reviewed is highlighted in the display. Press the chef
function key. The cooking mode key for the first step will illuminate and the program mode, temperature,
time, or core temperature will appear in the display. Rotate the adjustment knob to review each step.
S 1 – C
E C T I O N
FUNCTION ACTIVATED, PRESS THE PROGRAM INSTALL AND EDIT KEY.
L M
and down arrow keys or r o t a t e t h e a d j u s t m e n t k n o b u n t i l t h e r e c o r d
i s h i g h l i g h t e d i n t h e d i s p l a y .
will appear in the display and the oven can be operated normally.
L M
a n d d o w n
P I
O N T R O L A N E L D E N T I F I C A T I O N
a r r o w k e y s o r r o t a t e t h e
i s h i g h l i g h t e d i n t h e d i s p l a y .
L M
and down arrow key to select
• C O M B I T H E R M G A S T
A
—
— — — — — —
S M • 3 7
E C H N I C A L E R V I C E A N U A L
key