Alto-Shaam 6.10ESG Technical & Service Manual page 34

Q U I C K P R O G R A M M I N G
This quick programming function provides the operator with the ability to temporarily program a cooking
procedure using multiple cooking modes, along with any auxiliary functions desired. Quick programming is
particularly useful when cooking several batches of the same product back-to-back and will remain
programmed until any new cooking mode key is pressed.
PRESS AND HOLD THE FIRST REQUIRED COOKING MODE FOR A PERIOD OF 3-SECONDS.
01/01 will appear at the top of the display indicating STEP ONE.
The temperature and time will appear directly below 01/01.
PRESS THE TEMPERATURE KEY.
The temperature will become highlighted within the display.
PRESS THE TIME KEY OR THE CORE TEMP KEY
The time or core temperature will become highlighted within the display.
PRESS AND HOLD THE SECOND REQUIRED COOKING MODE FOR A PERIOD OF 3-SECONDS.
Follow the above directions until all steps have been entered.
PRESS THE START KEY.
The oven will begin cooking as programmed, automatically switching to each cooking
mode entered. Each step entered will be indicated in the display as the oven cycles from
mode to mode.
PRESS THE STOP KEY OR OPEN THE OVEN DOOR WHEN THE BUZZER SOUNDS AT THE END
OF THE PROGRAM.
THIS PROGRAM WILL REMAIN IN TEMPORARY MEMORY UNTIL ANY NEW
COOKING MODE KEY IS PRESSED. QUICK PROGRAMMING CAN BE SAVED AND
STORED IN MEMORY ON DELUXE MODELS ONLY.
S 1 – C
E C T I O N
A D VA N C E F E AT U R E S
ROTATE THE ADJUSTMENT KNOB TO SELECT THE REQUIRED TEMPERATURE.
ROTATE THE ADJUSTMENT KNOB TO SELECT THE REQUIRED SETTING.
: 0 1 / 0 5 = S T E P O N E O F F I V E
E X A M P L E
0 2 / 0 5 = S T E P T W O O F F I V E
P I
O N T R O L A N E L D E N T I F I C A T I O N
.
• C O M B I T H E R M G A S T
E C H N I C A L
S M • 3 4
E R V I C E A N U A L