Zone Edit - ZyXEL Communications ZyWALL USG 300 User Manual

Unified security gateway

Hide thumbs Also See for ZyWALL USG 300:

Table of Contents

Chapter 14 Zones

14.3 Zone Edit

The Zone Edit screen allows you to add or edit a zone. To access this screen, go

to the Zone screen (see

Figure 186 Network > Zone > Edit

The following table describes the labels in this screen.

Table 88 Network > Zone > Edit

Block Intra-

zone Traffic

Section 14.2 on page

Type the name used to refer to the zone. You may use 1-31

alphanumeric characters, underscores(

character cannot be a number. This value is case-sensitive.

Select this check box to block network traffic between members in the

Available lists the interfaces and VPN tunnels that do not belong to any

zone. The word in front of the name indicates whether this member is an

interface or a VPN tunnel.

INTERFACE - this member is an interface.

IPSEC - this member is a VPN tunnel.

Select the interfaces and VPN tunnels that you want to add to the zone

you are editing, and click the right arrow button to add them.

Member lists the interfaces and VPN tunnels that belong to the zone.

Select any interfaces that you want to remove from the zone, and click

the left arrow button to remove them.

287), and click the Add icon or an

), or dashes (-), but the first

ZyWALL USG 300 User's Guide

Show Quick Links

Table of Contents