Installation Setup, One Isp - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 4 Wizard Setup

• INSTALLATION SETUP, ONE ISP

Click this link to open a wizard to set up a single Internet connection for Gigabit
Ethernet (ge) interface 2. This wizard creates matching ISP account settings in
the ZyWALL if you use PPPoE or PPTP. See
• INSTALLATION SETUP, TWO ISP
Click this link to open a wizard to set up Internet connections for Gigabit
Ethernet interfaces 2 and 3. See
interface to one ISP (or network) and connect the other to a second ISP (or
network). You can use the second WAN connection for load balancing to
increase overall network throughput or as a backup to enhance network
reliability. This wizard creates matching ISP account settings in the ZyWALL if
you use PPPoE or PPTP. This wizard also configures a WAN trunk. See
11 on page 249
• VPN SETUP
Use VPN SETUP to configure a VPN connection. See
4.2 Installation Setup, One ISP
The wizard screens vary depending on what encapsulation type you use. Refer to
information provided by your ISP to know what to enter in each field. Leave a field
blank if you don't have that information.
Note: Enter the Internet access information exactly as your ISP gave it to you.
Figure 16 Internet Access: Step 1
56
Section 4.4 on page
for more on load balancing and trunks.
Section 4.2 on page 56.
65. You can connect one
Section 4.5 on page
ZyWALL USG 300 User's Guide
Chapter
67.