Default Interface And Zone Configuration - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 5 Configuration Basics

5.2.2 Default Interface and Zone Configuration

This section explains the ZyWALL's factory default zone and interface
configuration. The following figure uses letters to denote public IP addresses or
part of a private IP address.
Figure 35 Default Network Topology
•
Default Port, Interface, and Zone Configuration
PORT
1
2, 3
4, 5
6
7
AUX
CONSOLE N/A
ge1 interface. The LAN zone is a protected zone. The ge1 interface uses
192.168.1.1.
84
IP ADDRESS AND DHCP
INTERFACE ZONE
SETTINGS
ge1 LAN 192.168.1.1, DHCP server
enabled
ge2, ge3 WAN DHCP clients
ge4, ge5 DMZ 192.168.2.1 (ge4) and
192.168.3.1 (ge5), DHCP
server disabled
ge6 WLAN 10.59.0.1, DHCP server
enabled
ge7 None None, DHCP server
disabled
aux None None
None None
The LAN zone contains the
SUGGESTED USE WITH
DEFAULT SETTINGS
Protected LAN
Connections to the Internet
Public servers (such as web,
e-mail and FTP)
Wireless access points
Optional
Auxiliary modem
Local management
ZyWALL USG 300 User's Guide