C
H A P T E R
12.1 Policy and Static Routes Overview
Use policy routes and static routes to override the ZyWALL's default routing
behavior in order to send packets through the appropriate the interface or VPN
tunnel.
For example, the next figure shows a computer (A) connected to the ZyWALL's
LAN interface. The ZyWALL routes most traffic from A to the Internet through the
ZyWALL's default gateway (R1). You create one policy route to connect to
services offered by your ISP behind router R2. You create another policy route to
communicate with a separate network behind another router (R3) connected to
the LAN.
Figure 172 Example of Policy Routing Topology
A
R3
You also use policy routes to send traffic through VPN tunnels. Using the VPN
wizard automatically configures a corresponding policy route, but you must
manually configure a policy route if you use the main VPN screens to configure a
VPN connection.
Note: You can generally just use policy routes. You only need to use static routes if
you have a large network with multiple routers where you use RIP or OSPF to
propagate routing information to other routers.
ZyWALL USG 300 User's Guide
Policy and Static Routes
LAN
R1
WAN
R2
12
259