Creating An Active Directory Or Ldap Group - ZyXEL Communications ZyWALL USG 300 User Manual

41.3.1 Creating an Active Directory or LDAP Group

Click Object > AAA Server > Active Directory (or LDAP) > Group to display
the Active Directory (or LDAP) > Group screen. Click the Add icon or an Edit
icon to display the configuration fields.
Figure 463 Object > AAA Server > Active Directory (or LDAP) > Group > Add
The following table describes the labels in this screen.
Table 211 Object > AAA Server > Active Directory (or LDAP) > Group > Add
LABEL
General
Settings
Host
Port
Bind DN
Password
ZyWALL USG 300 User's Guide
DESCRIPTION
All AD or LDAP servers in a group share the same settings in the fields
below.
Enter a descriptive name (up to 63 alphanumerical characters). for
identification purposes.
Specify the port number on the AD or LDAP server(s) to which the
ZyWALL sends authentication requests. Enter a number between 1 and
65535.
This port number should be the same on all AD or LDAP server(s) in this
group.
Specify the bind DN for logging into the AD or LDAP server. Enter up to
127 alphanumerical characters.
For example,
cn=zywallAdmin
name.
If required, enter the password (up to 15 alphanumerical characters)
for the ZyWALL to bind (or log in) to the AD or LDAP server.
Chapter 41 AAA Server
specifies
zywallAdmin
as the user
679