Firewall; Chapter 20 Firewall; Overview; What You Can Do In The Firewall Screens - ZyXEL Communications ZyWALL USG 300 User Manual

C
H A P T E R

20.1 Overview

Use the firewall to block or allow services that use static port numbers. Use
application patrol (see
dynamic port numbers. The firewall can also limit the number of user sessions.
This figure shows the ZyWALL's default firewall rules in action and demonstrates
how stateful inspection works. User 1 can initiate a Telnet session from within the
LAN zone and responses to this request are allowed. However, other Telnet traffic
initiated from the WAN or DMZ zone and destined for the LAN zone is blocked.
Communications between the WAN and the DMZ zones are allowed. The firewall
allows VPN traffic between any of the networks.
Figure 221 Default Firewall Action

20.1.1 What You Can Do in the Firewall Screens

• Use the Firewall screens
firewall and asymmetrical routes, and manage and configure firewall rules.
• Use the Session Limit screens (see
number of concurrent NAT/firewall sessions a client can use.
ZyWALL USG 300 User's Guide
Chapter 29 on page 467) to control services using flexible/
(Section 20.2 on page
Section 20.3 on page
20

Firewall

341) to enable or disable the
347) to limit the
333