ZyXEL Communications ZyWALL USG 300 User Manual page 788

Chapter 48 Logs
Events that generate an alert (as well as a log message) display in red. Regular
logs display in black. Click a column's heading cell to sort the table entries by that
column's criteria. Click the heading cell again to reverse the sort order.
Figure 541 Maintenance > Log > View Log
The following table describes the labels in this screen.
Table 253 Maintenance > Log > View Log
LABEL
Show Filter /
Hide Filter
Display
(Filter Hidden)
Email Log
Now
Refresh
Clear Log
Display
788
DESCRIPTION
Click this button to show or hide the filter settings.
If the filter settings are hidden, the Display, Email Log Now, Refresh,
and Clear Log fields are available.
If the filter settings are shown, the Display, Priority, Source Address,
Destination Address, Service, Keyword, and Search fields are
available.
Select the log category you want to view.
These fields and buttons display when you hide the filter.
Click this button to send log message(s) to the Active e-mail
address(es) specified in the Send Log To field on the Log Settings
page. (See Section 48.4.1 on page 791
for more information about these fields.)
Click this button to update the information on the log screen.
Click this button to clear the whole log, regardless of what is currently
displayed on the screen.
Select the log message(s) you want to view. You can also view All Logs
at one time, or you can view the Debug Log.
or Section 48.4.2 on page 792
ZyWALL USG 300 User's Guide