ZyXEL Communications ZyWALL USG 300 User Manual page 403

Table 126 VPN > SSL VPN > Global Setting (continued)
LABEL
SSL VPN Login
Domain Name
1/2
Message
Login Message
Logout Message Specify a message to display on the screen when a user logs out and
Update Client
Virtual Desktop
Logo
Browse
Upload
ZyWALL USG 300 User's Guide
DESCRIPTION
Specify a domain name for users to use for SSL VPN login. The domain
name must be registered to one of the ZyWALL's IP addresses or be one
of the ZyWALL's DDNS entries. You can specify up to two domain names
so you could use one domain name for each of two WAN ports. Do not
include the host. For example, www.zyxel.com is a fully qualified
domain name where "www" is the host; so you would just use
"zyxel.com".
The ZyWALL displays the normal login screen without the button for
logging into the Web Configurator as shown next.
Figure 258 SSL VPN Login Screen
Specify a message to display on the screen when a user logs in and an
SSL VPN connection is established successfully. You can enter up to 60
characters ("a-z", A-Z", "0-9") with spaces allowed.
the SSL VPN connection is terminated successfully. You can enter up to
60 characters ("a-z", A-Z", "0-9") with spaces allowed.
You can upload a graphic logo to be displayed on the web browser on
the remote user computer. The ZyXEL company logo is the default logo.
Specify the location and file name of the logo graphic or click Browse to
locate it.
Note: The logo graphic must be GIF, JPG, or PNG format. The
graphic should use a resolution of 127 x 57 pixels to avoid
distortion when displayed. The ZyWALL automatically resizes
a graphic of a different resolution to 127 x 57 pixels. The file
size must be 100 kilobytes or less. Transparent background
is recommended.
Click Browse to locate the graphic file on your computer.
Click Upload to transfer the specified graphic file from your computer to
the ZyWALL.
Chapter 22 SSL VPN
403