Configuring L2Tp Vpn In Windows Xp And 2000; Configuring L2Tp In Windows Xp - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 28 L2TP VPN Example
28.6 Configuring L2TP VPN in Windows XP and
2000
The following sections cover how to configure L2TP in remote user computers
using Windows XP and Windows 2000. The example settings in these sections go
along with the L2TP VPN configuration example in
Before you configure the client, issue one of the following commands from the
Windows command prompt to make sure the computer is running the Microsoft
IPSec service. Make sure you include the quotes.
• For Windows XP. use net start "ipsec services".
• For Windows 2000, use net start "ipsec policy agent".

28.6.1 Configuring L2TP in Windows XP

In Windows XP do the following to establish an L2TP VPN connection.
Click Start > Control Panel > Network Connections > New Connection
1
Wizard.
Click Next in the Welcome screen.
2
Select Connect to the network at my workplace and click Next.
3
Figure 301 New Connection Wizard: Network Connection Type
442
Section 28.1 on page
ZyWALL USG 300 User's Guide
437.