Sony TRINITRON BVM-14G1A Operation And Maintenance Manual page 75

5-1-2. Adjustments 2
Perform the following adjustments for each of the following
five input signals.
Set the settings required for each signal at the INPUT CON-
FIGURATION of the SETUP menu. When inputting the com-
posite signal, insert the NTSC input adapter BKM-24N
(NTSC)/25P (PAL) into the empty slot of the unit.
1. COMPONENT SMPTE/EBU-N10
100% color bar signal
All white peak
B–Y
R–Y
100 IRE all white signal
All white peak
20 IRE all white signal
All white peak
2. COMPONENT BETACAM SETUP 7.5
75% color bar signal
All white peak
B–Y
R–Y
100 IRE all white signal
All white peak
20 IRE all white signal
All white peak
3. COMPONENT BETACAM SETUP 0
75% color bar signal
All white peak
4. COMPOSITE NTSC SETUP 7.5
100% color bar signal
All white peak
5. COMPOSITE NTSC SETUP 0
100% color bar signal
All white peak
700 mV
700 mV p-p
700 mV p-p
700 mV
140 mV
714.29 mV
700 mV p-p
700 mV p-p
714.29 mV
142.86 mV
714 mV
714 mV
714 mV
Set as follows at the INPUT CONFIGURATION menu of
the SETUP menu.
FORMAT .............Set according to the input signal
SLOT NO ............. When component signal is input: 6
When composite signal is input: Slot
no. when BKM-24N (NTSC)/25P
(PAL) is mounted.
SYNC MODE ...... INT
5-3