Sony TRINITRON BVM-14G1A Operation And Maintenance Manual page 17

Color video monitor
Hide thumbs Also See for TRINITRON BVM-14G1A:
Table of Contents

Advertisement

SHIFT ON (LEDs of function buttons in orange)
16:9 button: When this button is pushed in (ON), the aspect ratio changes to
16:9, and when set to OFF, the aspect ratio changes to 4:3.
SYNC button: When this button is pushed in (ON), the monitor synchronizes
to the sync signal input to the SYNC connectors on the rear panel (EXT
SYNC). When set to OFF, it synchronizes to the sync signal included in
the signals being monitored (INT SYNC).
Notes
• When INT SYNC is selected, use a component or YC signals including a
sync signal on the Y signal, and use RGB signal including a sync signal
on the G signal.
16 : 9
• To monitor serial digital signals, select INT SYNC.
SYNC
BLUE ONLY button: When this button is pushed in (ON), red and green
BLUE
signals are cut, and only the blue signal is displayed as a monochrome
ONLY
picture. It makes it easy to adjust CHROMA and to check VTR noise.
R
MONO
R/G/B buttons: When these buttons are pushed in (ON), R(red), G(green),
and B(blue) beams are cut respectively.
G
APT
COMB
B
F1
F3
F3/F4 buttons: For future expansion.
F2
F4
SAFE
SAFE AREA button: When this button is pushed in (ON), a safe area is
ADDRESS
AREA
displayed on the screen.
Location and Function of Parts
!™ Monitor Memory Card slot
Insert the BKM-12Y Monitor Memory Card
(optional).
For information about operations on monitor memory card
data, see "Monitor Memory Card Data Operations —
MEMORY CARD menu" on page 46.
Proceed as illustrated to insert and eject the BKM-12Y
Monitor Memory Card.
To insert the BKM-12Y Monitor Memory Card
Monitor memory card insertion slot
To eject the BKM-12Y Monitor Memory Card
!£ OPTION connector
Connector for expansion.
1 3
1 4
Note
Do not eject the monitor memory card while data is
being saved or loaded.
Be careful not to let your hands
touch the connectors on the front
edge of the monitor memory card.
EJECT button
Monitor memory card
EJECT button
Press the EJECT button to eject
the monitor memory card.
Push the monitor
memory card in
until the EJECT
button comes out.
Take out the
monitor memory
card.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents