Chapter 1: Setting Up Your Usb Faxmodem; Connecting The Faxmodem To; Your Computer - Zoom USB Faxmodem Quick Start Manual

Chapter 1:
Setting Up Your USB Faxmodem
Note: If you have a PC and are replacing an existing in-
ternal modem, turn to Appendix A: Removing a
PC's Internal Modem (page 20) to decide whether
to keep or remove it.
Connecting the Faxmodem to Your Computer
1
Find the serial number of your faxmodem on the bot-
tom of the case, just under the bar code. Write the
number in the Important Information table on the last
page of this manual.
2
You do not have to shut down your computer. Connect
the cable. Plug the cable's square end into the USB
jack on the back of the faxmodem. Plug the other,
rectangular end into the USB connector on your com-
puter.
3
Connect the telephone cord. Plug one end of the cord
into the PHONE LINE jack on the back of the faxmo-
dem. Plug the other end into the wall jack just as you
would a standard telephone. You may also connect
your regular telephone to the back of the faxmodem, in
the jack labeled PHONE. See the following illustration.
The faxmodem works with or without a telephone con-
nected to it.
6 Quick Start and Reference Guide