Siemens Hicom 150 H Operating Instructions Manual page 35

6WHS#E\#6WHS
or
&RQWUROOLQJ#5HOD\V
If this feature is configured (contact System Support),
you can turn up to four relays on and off to control dif-
ferent facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe 150 V1.0 (system networking via PC net-
work) Æ page 44!
Lift the handset.
Enter the code for "on" or "off".
... Enter the relay.
3DJLQJ
If paging equipment is connected to your system (con-
tact System Support), you can contact people via their
pocket receivers.
The pocket receiver indicates to the person you are
looking for that someone is trying to get in touch. The
person you page can then go to the nearest telephone
and call you.
The operating procedures differ according to the type of
radio paging equipment connected (simple or enhanced
paging equipment).
6LPSOH#3DJLQJ#(TXLSPHQW
Paging:
To be paged, you must have activated a call ringing
group Æ page 40, call forwarding Æ page 26, or call re-
direction (service technician) to the internal station
number of your paging equipment.
A call request is then signaled automatically.
8VLQJ#2WKHU#)XQFWLRQV
68