Siemens Hicom 150 H Operating Instructions Manual page 26

&DOO#)RUZDUGLQJ
6WHS#E\#6WHS
59
&DOO#)RUZDUGLQJ
8VLQJ#9DULDEOH#&DOO#)RUZDUGLQJ
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
Lift the handset.
Enter the code.
or or Enter the line type you wish to use:
1 = all calls, 2 = external calls only, 3 = internal calls
only
Enter the destination number (without the external
code).
Deactivating call forwarding:
Lift the handset.
Enter the code.
Special features must be taken into consider-
ation if your telephone operates with HiPath
AllServe 150 V1.0 (system networking via PC net-
work) Æ page 42!
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact System Support),
you can also forward calls to this destination.
Destinations: Fax = 870, DID = 871,
Fax DID = 872.