6. DATA REPORT AND POLLING
6.3
DNID (Data Network Identification)
When you make a contract with an information provider, DNIDs are downloaded from
the information provider to the FELCOM, via the appropriate LES.
Up to 64 DNIDs can be downloaded to the FELCOM. You can see which DNIDs are
stored by following the procedure shown below.
6.3.1
How to display DNIDs
You need to make a contract with an LES to exchange data within a group. The LES
sends a DNID (Data Network Identification) number to each member of the group. The
FELCOM can store a maximum of 64 DNIDs.
1. Press the F5 and 4 keys to show the [Data Network ID] list.
Mark '*' means activation.
No.
01
02
03
STP
04
05
06
07
08
"Act" indications and their meanings
Asterisk: Enabled DNID
No indication means disabled DNID.
24h: Enabled DNID. TX cycle changes every 24 hours.
STP: Enabled DNID. TX temporarily disabled.
6.3.2
How to enable, disable DNIDs
A DNID can be enabled or disabled as follows:
1. Press the F5 and 4 keys to show the [Data Network ID] list.
2. Select the DNID to process then press the Enter key. A password input screen
appears. Enter the password provided by the LES. The screen shown below ap-
pears. (If the password is wrong, the password input screen closes.)
3. Select applicable item then press the Enter key.
Disable: DNID disabled Enable: DNID Enabled
Enable (24-hour): DNID enabled (TX cycle changes every 24 hours.)
Enable (Temporary Stop): DNID enabled (TX temporarily stopped)
4. The [Update] window appears. [Yes] is selected; press the Enter key.
6-8
Sub address
Data Network ID
Act
DNID
LES
Subaddr
*
01000
002
000
24h
01001
001
001
01002
102
002
01003
131
003
*
01004
202
004
24h
01005
210
000
STP
01006
302
001
01007
304
002
Disable
Enable
Enable (24-hour)
Enable (Temporary Stop)
Member number using DNID
Ctrl+P: Print
Member
Text
235
085
215
033
227
013
079
089
Need help?
Do you have a question about the FELCOM19 Inmarsat Mini-C MES and is the answer not in the manual?
Questions and answers