How To Display The Egc Message Log - Furuno FELCOM19 Inmarsat Mini-C MES Operator's Manual

5. INMARSAT COMMUNICATIONS
has been disabled by the MES operator will be written over. If none has been disabled,
then the new download is not accepted.
Follow the procedure below to enable or disable an ENID.
1. Press the F4 and 2 keys to show the [EGC Network ID] screen.
2. Select the ENID to inhibit or activate.
3. Press the Enter key to enable or disable the ENID as appropriate. Enabled ENIDs
show an asterisk (*).
4. Long-press the Esc key to return to the standby display.
5.4.3

How to display the EGC message log

1. Press the F6 and 3 keys to show the [EGC Message] log.
Message No.
E0021118.028
E0021118.028
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[ENTER]: Show Detail
[Ctrl]+[E]: Export
Scroll: ↑, ↓
Display message: Press the Enter key.
Save message: Press the E key while pressing and holding down the Ctrl key.
Delete message: Press the D key to show the Delete window. [Yes] is selected;
press the Enter key.
2. Long-press the Esc key to return to the standby display.
5-22
EGC Network ID List
Mark '*' means activation.
01 * 11111
02
* 22222
03 * 33333
04 * 44444
05
* 55555
EGC Message
LES Priority Size Seq. No. Rec date&Time Type
KDDI Urgent 428
KDDI Safety 428
[Ctrl]+[P]: Print [Delete]: Delete
Ctrl+P: Print
01641 11-11-25 10:27 MET/NAV
02035 11-11-11 05:21 U.M Rct
Memory available: 32767 Bytes