Warning Messages - Furuno FELCOM19 Inmarsat Mini-C MES Operator's Manual

8. MAINTENANCE AND TROUBLESHOOTING
8.7.2

Warning messages

Messages in this category are prefixed with "WARNING".
Error message
BBER over 80%. Scanning
NCS start manually.
Cannot enter new DNID.
Memory full for DNIDs.
Cannot enter new ENID.
Memory full for ENIDs.
Cannot find NCS CC in all
region. Scanning is contin-
ued.
Cannot find NCS CC in pre-
ferred region. Scanning all
region is started.
Internal GPS UNIT failure.
Synchronization loss.
Please change EGC chan-
nel.
Synchronization loss.
Please check the current
ocean region.
8-8
Meaning
BBER (Bulletin Board Error
Rate) exceeded 80%.
Memory for DNIDs is full.
Memory for ENIDs is full.
No NCS found in region.
NCS could not be found in
region selected. Scanning
started to find NCS.
GPS signal could not be
found.
Your station is not synchro-
nized with selected EGC
channel.
Your station is not synchro-
nized with selected NCS.
Action
Select NCS manually.
Delete unnecessary DNIDs
to enter new ones.
Delete unnecessary ENIDs
to enter new ones.
Scanning automatically
continues.
If NCS could not be found,
contact you dealer for ad-
vice.
Internal GPS receiver may
be damaged if this mes-
sage appears frequently.
Contact your dealer for ad-
vice.
Change EGC channel.
Change NCS.