Printer States - CAB XC Series Operator's Manual

10 3 Control Panel
3.3

Printer States

State
Ready
Printing label
Pause
Correctable error
Irrecoverable error
Critical error
Power Save Mode
Table 2
Display
Ready
and configured symbol displays,
such as time
Printing label
and the number of the printed
label in the print job.
Pause
and the symbol
and the type of error
and the number of labels still to
be printed.
and the type of error
and the number of labels still to
be printed.
and the type of error
and the key lighting is switched
off
Printer states
Description
The printer is in the ready state and can receive
data.
and date
The printer is currently processing an active print
job.
Data can be transmitted for a new print job.
The new print job will start when the previous one
has finished.
The printing process has been interrupted by the
operator.
The print process may be continued by pressing the
pause key.
The printing process has been interrupted automati-
cally by passing a pre-defined rest diameter of the
ribbon supply roll.
After loading a new ribbon roll the print process
may be continued by pressing the pause key.
An error has occurred that can be rectified by the
operator without interrupting the print job.
The print job can be continued after the error has
been rectified.
An error has occurred that cannot be rectified
without interrupting the print job.
An error occurs during the system test.
 Switch the printer off and then on again at the
power switch or
 Press cancel key.
Call Service if the fault occurs persistently.
If the printer is not used for a lengthy period, it
automatically switches to power save mode.
 To exit power save mode: Press any key on the
navigator pad.
10