Configuration; Overview; General - Abus TVVR30004 User Manual

Configuration

Note
The "Configuration" menu is used to manage all
device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead
to data loss!
Ensure a data backup has been made in good
time beforehand.

Overview

Menu Setting

General

Language, video, time, date,
mouse pointer, password, time
zones and other settings
Network Required network settings
(manual IP, DHCP, PPPOE,
DDNS etc.)
Warning Behaviour of the device in ex-
ceptional cases
(HDD full, network disconnect-
ed etc.)
User Adding and changing users,
assigning authorisation rights
Note
Pay attention to the instructions in the correspond-
ing sections.
General
"General" tab
Language
CVBS Output
Standard
Resolution
Time Zone
Date Format
System
Date/Time
Mouse Pointer
Speed
Enable Wizard
Page
Enable ID Au-
82
thentification
83
88
Activating LED
status bar
88
Activate remote
access
Configuration
Setting
Language on the OSD
PAL / NTSC
Resolution on the monitor
GMT (Greenwich Mean Time)
MM-DD-YYYY, DD-MM-YYYY,
YYYY-MM-DD
Date and time
Set on the scroll bar (left =
low speed; right = high speed)
Box ticked:
Wizard will appear after restart of the
device.
Box not ticked:
In order to enter a menu no password
has to be entered. At access by net-
work the password has to be entered.
Box ticked:
Password must be entered in order to
use the menu.
Box not ticked:
The LED status display is deactivat-
ed.
Box ticked:
The LED status display glows blue
when the recorder is on.
Box ticked:
Access for remote configuration is ac-
tivated for technical support.
82