Advanced Configuration; Image Recording (Detection) - Abus NVR10020P User Manual

Advanced Configuration

Record Audio
Pre-play
Post-play
Video Stream
Maximum
usability time
(days)
Redundant
(video/image)

Image recording (detection)

First, enable the schedule, click on a trigger and then click and drag in the week
calender using the lift-hand mouse button to define the desired times.
Duration
Event
Motion
Alarm
M | A
Enables audio recording (provided that the camera delivers a
signal and the stream is switched to "Video & Audio")
Here you can enable pre-play recording
Note: Depending on the system configuration and the number of
cameras, you can save up to 10 seconds.
Select the duration for which event recordings are saved post-play
Select the stream source for the recording. In "Stream1&2", both
streams are recorded
Specify how many days the recordings can be stored for before
being overwritten
Enables storage for the HDD group "redundant" (only available
when the HDD group mode is activated).
Snapshots are continuously saved
A snapshot is saved for all types of event (motion or VCA events).
An image is only saved for motion detection
An image is only saved for alarm input (local/remote)
An image is saved for motion detection or alarm input
(local/remote)
29