Table of Contents
Advertisement
Appendix B – Troubleshooting
Following these simple steps can eliminate most common problems.
1. Install software first. After installing the software then proceed to adding the hardware. This places
the required installation files in the correct locations.
2. Read this manual thoroughly before attempting to install the adapter in your system.
3. Use Device Manager under Windows to verify proper installation. Refer to the Verifying Hardware
section of this manual for instructions.
4. Several utilities with source code are included to verify the functionality of the outputs and to aid in
application development. Consult the pin out diagrams to test at the card edge connector or at the
end of the cable.
5. Use the VCTest to verify the basic I/O functionality of your digital I/O board. The source code is
included to simplify application development in the programming language C.
©Sealevel Systems, Inc.
SL9235 3/2013
8003e Manual
24
Advertisement
Table of Contents
