Avermedia AverDigi EH1000H-4 Nano User Manual page 122

Analog Camera
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns purple when it is selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block Sun. to Sat.
represent the day in the week block. To record in full 24 hours and 7 days a week, select the recording mode
and click the  button. If you want to only record at a particular time or day, click Schedule button and select
the Recording Mode , and then click on the time or day blocks. When the system starts recording a red triangle
mark would appear at the upper left corner of the screen.
The recording modes are listed below:
- Always Recording
Record the video from the selected camera and save it to the designated storage path
- Motion Recording
Start recording the video from the selected camera only when the system detects movement. Once a motion
is detected, the system automatically saves the previous frames and stop based on the Start Record Prior
116