Dhcp Radio Buttons; Ip Address Field; Gateway Ip Address Field; Subnet Mask Field - Extron electronics MPX 866 A User Manual

Media presentation matrix switcher
Hide thumbs Also See for MPX 866 A:
Table of Contents

Advertisement

DHCP radio buttons

The
DHCP On
radio button directs the switcher to ignore any entered IP addresses and
to obtain its IP address from a Dynamic Host Configuration Protocol (DHCP) server (if the
network is DHCP capable). The
system administrator to determine if DHCP is appropriate.
NOTE:
When you change DHCP from on to off, the IP address of the switcher resets to
its default value, 192.168.254.254.

IP Address field

The
IP Address
field contains the IP address of the connected switcher. This value is
encoded in the flash memory of the switcher.
Standard IP protocol consists of addresses comprised of four 1-, 2-, or 3-digit numeric
subfields, properly called octets, separated by dots (periods). Each field can be numbered
from 000 through 255. Leading zeroes, up to three digits total per field, are optional. Values
of 256 and above are invalid.
The factory-installed default address is 192.168.254.254, but if this conflicts with other
equipment at your installation, you can change the IP address to any valid value.
NOTE:
IP address changes can cause conflicts with other equipment. Only local system
administrators should change IP addresses.

Gateway IP Address field

The
Gateway IP Address
be used if the switcher and the mail server are not on the same subnet. Standard IP protocol
rules apply to the Gateway IP address.

Subnet Mask field

The
Subnet Mask
field is used to determine whether the switcher is on the same subnet as
the mail server when you are subnetting. Standard IP protocol rules apply to the Gateway IP
address. For more information, see
MAC Address
The Media Access Control (MAC) Address is hardcoded in the switcher and cannot be
changed.
Firmware field
The
Firmware
field identifies the installed firmware version. This field is hardcoded in the
switcher and cannot be changed.
MPX 866 A Media Presentation Matrix Switcher • HTML Operation
DHCP Off
radio button turns DHCP off. Contact the local
field identifies the address of the gateway to the mail server to
"Subnetting — A
Primer".
100

Advertisement

Table of Contents
loading

Table of Contents