Performing A System Reset From The Front Panel - Extron electronics MPX 866 A User Manual

Performing a System Reset from the Front Panel

The front panel reset is identical to the
Programming Guide section. A system reset:
Clears all ties and presets
z z
Clears all video and audio mutes
z z
Sets all input audio levels to unity gain (+0 dB)
z z
Sets all output volume levels to 100% (0 dB of attenuation).
z z
Reset the switcher to the factory default settings by pressing and holding the Video button
and Audio button while you apply AC power to the switcher (see figure 21).
NOTE:
Press and hold the Video and Audio buttons
while you apply power to the switcher.
VIDEO
The switcher's LEDs and then go dark.
Continue to hold the Video and Audio buttons until all input and output
LEDs return to the unlit state and the Video and Audio LEDs turn on.
Release the Video and Audio buttons.
Figure 21.
System reset does not reset the Internet protocol (IP) settings or replace user-
installed firmware.
I/O
— and —
AUDIO
System Reset
MPX 866 A Media Presentation Matrix Switcher • Operation
E ZXXX}
SIS command described in the
Power
49