Reference Information; Specifications - Extron electronics MPX 866 A User Manual

Reference
Information
This section discusses the specifications, part numbers, and accessories for the
MPX 866 A Media Presentation Matrix Switcher. Topics that are covered include:
z z
z z
z z
z z

Specifications

Video
Routing
RGB/VGA ................................. 8 x 6 matrix
S-video/composite video .......... 6 x 6 matrix
Gain ............................................... Unity
Bandwidth
RGB/VGA ................................. 300 MHz (-3 dB), fully loaded
S-video/composite video .......... 150 MHz (-3 dB), fully loaded
0 - 10 MHz ........................ No more than +0.1 dB to -0.1 dB
0 - 30 MHz ........................ No more than +0.1 dB to -0.5 dB
Differential phase error ................... 1.0° at 3.58 MHz and 4.43 MHz
Differential gain error ..................... 1.0% at 3.58 MHz and 4.43 MHz
Crosstalk
RGB/VGA ................................. <-50 dB @ 10 MHz, <-30 dB @ 100 MHz
S-video/composite video .......... -50 dB @ 5 MHz
Switching speed ............................. 100 ms (max.)
Video input
Number/signal type
RGB/VGA ................................. 8 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level or tri-level sync),
S-video/composite video .......... Up to 4 S-video and 2 composite video
Connectors
RGB/VGA ................................. 8 female 15-pin HD
S-video/composite video .......... 4 x 2 female BNC for S-video or composite video (inputs 11 to 14) and
Nominal level ................................. 1 Vp-p for Y of component video and S-video and for composite video
Minimum/maximum levels
RGB/VGA ................................. Analog: 0.3 V to 1.5 Vp-p with no offset
S-video/composite video .......... Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance ..................................... 75 ohms
Horizontal frequency (RGB) ............ 15 kHz to 145 kHz
Vertical frequency (RGB) ................. 30 Hz to 170 Hz
Specifications
Part Numbers
Mounting the Switcher
Button Labels
S-video, or composite video
or
6 composite video
2 x 1 female BNC for composite video or genlock only (inputs 9 and 10)
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
MPX 866 A Media Presentation Matrix Switcher • Reference Information 120 120