Wsw43 Function Setting; Wsw44 Speeding Up Scanning-1 - Brother MFC8500 Service Manual

Selector
No.
1
Not used.
2
Wait time for PCFax reception
(Class 2) and FPTS command
transmission
3
4
Detection time of 2100 Hz CED or
ANSam
5
6
| Not used.
8
Selector
No.
1
| Not used.
5
Effective time length of the white
6
| level compensation data obtained
8
beforehand
NOTE: WSW44 is applicable only to models equipped with a flat-bed scanner.
Selectors 6 through 8: Effective time length of the white level compensation data obtained
If you set documents in the ADF and the document front sensor detects them or if you open the
document tray ASSY and the document tray open sensor detects the open state, then the controller
will make correction of the reference voltage to be applied to white level compensation for
document scanning before the Copy button is pressed.
These selectors determine how long compensation data obtained beforehand will keep effective.
WSW43
(Function setting 19)
Function
WSW44
(Speeding up scanning-1)
Function
beforehand
44
Setting and Specifications
No. 2 3
0 0 :
0 1 :
1 0 :
1 1 :
No. 4 5
0 0 :
0 1 :
1 0 :
1 1 :
Setting and Specifications
No. 6 7 8
0 0 0 : Obtained compensation data
ineffective
0 0 1 : 1 min.
0 1 0 : 3 min.
0 1 1 : 5 min.
1 0 0 : 10 min.
1 0 1 : 15 min.
1 1 0 : 20 min.
1 1 1 : 30 min.
WWW.OASD.CN
50 ms
100 ms
150 ms
0 ms
200 ms
300 ms
400 ms
500 ms
WWW.OASD.CN