Brother MFC8500 Service Manual page 83

(22) From the upper FU frame, remove the screw, slightly lift up the shutter of the ejection actuator
3, and remove the jam sensor PCB.
Ejection actuator 3
(23) Turn the ejection actuator 3, move it to the right, and lift it up and out of the support.
Ejection actuator 3
Screw, bind B tite 3x10
IV - 42
WWW.OASD.CN
Jam sensor PCB
Upper FU frame
Support
Upper FU frame
WWW.OASD.CN