Setting Up Sequential Polling Receive (For Fax-333Mc Only); Setting Multi-Function Link ® Mode; (With Multi-Function Link ® Option) - Brother FAX-202 Owner's Manual

Setting Up Sequential Polling Receive
(For FAX-333MC Only)
Your fax machine can request documents from several fax units in a single operation.
Afterward, a Sequential Polling Report will be printed.
1
Press Function/Set, 2, 5.
The screen displays:
2
Press or
3
Press Function/Set. The screen prompts you
to enter the fax numbers to be polled.
4
Specify the destination fax machines you wish
to poll, using One Touch, Speed Dial or a
Group.
5
Press Start.
Your fax machine will poll each number or
group member in turn for an original.
Setting Multi-Function Link
(With Multi-Function Link
If you connect your fax machine to your PC, you can receive faxes into your PC.
(See Multi-function Link
Multi-Function Link
Receive Only/Fax Receive Only) for routing incoming faxes.
1
Press Function, 2,
2
Press or
RECEIVE ONLY or FAX RECEIVE ONLY.
3
Press Set when the screen displays your selection.
4
Press Stop to exit.
For Middle East Countries, Multi-Function Link
English and Arabic Windows 95/98 and NT w.s. ver4.
The Multi-Function Link
Please check with the dealer or distributor in your country.
5 - 9
S E T U P R E C E I V E
to select Polling ON.
®
option, Chapter 14.) After completing all setup for
®
, you can select Multi-Function Link
7 .
to select PC PRIMARY, PC
®
and Multi-Function Link
POLLING RX:OFF?
SELECT < - - > & SET
POLLING RX:ON?
ENTER FAX NO.
PRESS START KEY
ACCEPTED
DIALING
®
Mode
®
option)
®
7.MF LINK
®
Pro is available, which works with
®
Pro are optional accessories.
Mode (PC Primary/PC