Wsw37 Function Setting - Brother MFC8500 Service Manual

Selector
No.
Printout of the stored image data of
1 an unsent document onto the error
report
Erasure of the stored image data of
an unsent document at the time of
2
the subsequent in-memory message
transmission
3
| Not used.
8
Selector 1: Printout of the stored image data of an unsent document onto an error report
This selector determines whether or not the 1st-page image data of a document will be printed out
onto the error report if the document image data stored in the temporary memory cannot be
transmitted normally.
Selector 2: Erasure of the stored image data of an unsent document at the time of the subsequent
in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the temporary
memory will be occupied with image data. Setting selector 2 to "1" will automatically erase the
stored 1st-page image data of an unsent document at the time of the subsequent in-memory
message transmission only when recording paper or toner runs out.
WSW37
(Function setting 15)
Function
37
Setting and Specifications
0: No 1: Yes
0: No 1: Yes
WWW.OASD.CN
WWW.OASD.CN