Paper Feed Roller Assy - Brother MFC8500 Service Manual

1.26 Paper Feed Roller ASSY

(1) Unhook the latch (arrow
screwdriver and pull out the gear 21 (arrow
(2) Place the main chassis rightside up.
(3) At the right end of the paper feed roller shaft, pull up the pawl of the bushing (arrow
tip of a flat screwdriver and move the paper feed roller ASSY to the left (arrow
out the bushing and paper feed roller ASSY.
(4) Remove the joint (arrow
Reassembling Notes
• When setting the gear 21 back into place, insert it and turn it so that its D-shaped end becomes
fitted with the D-shaped end of the paper feed roller ASSY.
) provided on the underside of the plastic frame by using a small flat
).
).
IV - 60
WWW.OASD.CN
) with the
). Then take
WWW.OASD.CN