Wsw10 Protocol Definition - Brother MFC8500 Service Manual

Selector
No.
Switching of DPS, following the
1
CML ON/OFF
Time length from transmission of
2
the last dial digit to CML ON
Time length from CML ON to
3
CNG transmission
Time length from CML ON to
CED transmission (except for
4
facsimile-to-telephone switching)
5
No. of training retries
6
7
Encoding system
(Compression)
8
Selector 1: Switching of DPS, following the CML ON/OFF
Setting this selector to "1" automatically switches DPS following the CML ON/OFF operation.
Selector 2: Time length from transmission of the last dial digit to CML ON
This selector sets the time length from when the equipment transmits the last dial digit until the
CML relay comes on.
Selector 3: Time length from CML ON to CNG transmission
This selector sets the time length until the equipment transmits a CNG after it turns on the CML
relay.
Selector 4: Time length from CML ON to CED transmission
This selector sets the time length until the equipment transmits a CED after it turns on the CML
relay. This setting does not apply to switching between facsimile and telephone.
Selectors 5 and 6: No. of training retries
These selectors set the number of training retries to be repeated before automatic fallback.
Selectors 7 and 8: Encoding system (Compression)
This selector determines whether or not use of the MR/MMR coding system will be allowed.
WSW10
(Protocol definition 2)
Function
MR
MMR
14
Setting and Specifications
0: No
0: 100 ms
0: 2 sec.
0: 0.5 sec.
No. 5 6
0 0 : 1 time
0 1 : 2 times
1 0 : 3 times
1 1 : 4 times
0: Allowed
0: Allowed
WWW.OASD.CN
1: Yes
1: 50 ms
1: 4 sec.
1: 2 sec.
1: Not allowed
1: Not allowed
WWW.OASD.CN