Table of Contents
Advertisement
START PROCEDURE CROKER RP50XD, RP100XD &
RP150XD RANGE MIXERS
1) Raise the mixing star assembly by way of the large hand wheel, rotate the wheel in a
clockwise direction to raise the star assembly
2) Ensure the mixing pan is in place on the pan rack (gear) and correctly seated down.
3) Turn the power on at the red isolator switch on the control panel
4) Ensure the red emergency stop plunger on the front of the control panel is not
depressed.
5) Press the green start button.
6) With both hands on the hand wheel, rotate the hand wheel anti-clockwise and lower
the mixing star slowly and gently down into the mixing pan. The motors driving the pan
and star should start automatically as the star enters the pan.
Note: do not allow the mixing star assembly to drop in an uncontrolled manner into
the mixing pan, lower it slowly with both hands on the hand wheel.
Advertisement
Table of Contents
