Technical Data - Hilti SF 22­A Operating Instructions Manual

Designation
Charger for Li-ion batteries
Charger for Li-ion batteries
Battery
Battery
en
Battery
Belt hook
Designation
Keyless chuck clamping range ∅ 1.5...13 mm
Drilling diameter range in wood
(soft)
Drilling diameter range in wood
(hard)
Drilling dia. range in metal
Wood screws (max. length 240
mm)
Driving screws in plastic an-
chors (max. length 120 mm)

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC
voltage)
Weight in accord-
ance with EPTA
procedure 01/2003
Dimensions (L x W
x H)
Speed in 1st gear
Speed in 2nd gear
Speed in 3rd gear
Torque with tool
set to drilling sym-
bol (soft/flexible
joint)
Torque range (15
settings)
Hammering speed
when drilling in 3rd
gear
Hammer drilling
in masonry (max.
length 100 mm)
NOTE
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure. The declared
vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over
the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool
is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total
working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work
patterns.
20
Printed: 30.09.2013 | Doc-Nr: PUB / 5071534 / 000 / 02
Short designation
C 4/36­90
C 4/36­350
B 22/3.3 Li­Ion
B 22/2.6 Li­Ion
B 22/1.6 Li­Ion
Description
∅ 1.5...32 mm
∅ 1.5...20 mm
∅ 1.5...13 mm
∅ 3...10 mm
∅ Max. 10 mm
SF 22-A
21.6 V
2.8 kg
248 mm x 92 mm x
244 mm
0...370/min
0...1,250/min
0...2,140/min
Max. 50 Nm
2...12 Nm
SFH 22-A
21.6 V
2.9 kg
265 mm x 92 mm x
244 mm
0...370/min
0...1,250/min
0...2,140/min
Max. 50 Nm
2...12 Nm
39,000/min
∅ 4...12 mm